Ways to remove wax from carpet

remove wax

Cleaning the carpet itself can be difficult and tedious, and when wax stains appear on it, it can be confusing for the owner. But there are actually several ways to remove such stains quickly and effectively.

Removing wax with cold

Exposure to cold is one of the main ways to remove wax from the carpet. Ice or any other cold object is suitable for freezing. Before you remove the wax from the carpet, ice should be wrapped in cling film beforehand, and then placed on the damaged area. Wait until the wax hardens (it should not just harden, but exactly harden), then remove it mechanically. This should be done as carefully as possible, so as not to damage the carpet itself.

In addition, it is recommended to go over the carpet with a vacuum cleaner, to remove the smallest particles of wax. After that, you can use any cleaning agent to remove any grease stain that may have remained on the nap.

High temperature vs wax

You can remove wax from your carpet by using this substance’s ability to melt at high temperature. There are several ways to clean the carpet of wax by using high temperature:

  • Remove the wax with a spatula or the blunt side of a knife. Place heavy cardboard over the remnants, then iron the area with a hot iron. The heat will melt the wax and print it onto the cardboard. You can also use a paper towel instead of cardboard. The iron should be warm, not hot, and you should change the towel several times while you are working. The steam function should be turned off on the iron. You may only turn it on after the wax has been removed, to remove any remaining dirt (you can iron the carpet through a clean cloth in this case).
  • If there is no possibility to use an iron, and no other thoughts on how to remove wax from the carpet yourself, you can use a hair dryer or a strongly heated spoon. In this case, cleaning will be safer, because there is an opportunity to dose the flow of hot air. Hold the hair dryer at some distance from the nap of the carpet, otherwise the device can overheat.

How to remove wax from the carpet with alcohol?

This method is relevant not so much when removing the wax itself, but when cleaning the carpet from grease stains that may have remained from the candle. After removing the remnants of wax, the carpet should be given time to cool or dry (depending on the method of cleaning chosen). After that, you should soak a cotton swab in alcohol, which should be wiped on the problem area. Next, the carpet should be dried using clean paper towels or microfiber cloths.

When removing stains in this way, it is strictly forbidden to pour alcohol directly on the carpet. This can lead to discoloration of the product or its shedding, the main problem will not be solved, and the question of how to remove wax from the carpet on their own, will remain relevant.

Vinegar solution with salt

Such a solution is considered a folk solvent, which has a mild, non-aggressive effect. You can use a mixture of vinegar and salt to remove both wax and wax. Knowing exactly how to remove candle wax from the carpet, you can proceed to action:

  • First you need to prepare a cleansing paste. To do this, you need to mix table vinegar, salt and baking soda until you get a homogeneous paste. The proportions of the components in it should be the same.
  • Apply the resulting remedy to the soiled area on the carpet, and then leave it to dry completely.
  • Now with a soft brush you need to rub the treated part of the product, trying to remove the applied agent (during this period of time the paste should dissolve wax or wax and absorb them in itself).
  • With this means you need to be extremely careful when treating dark carpets, because baking soda and vinegar have bleaching properties.

The cardinal way – the use of solvents

Resort to aggressive methods of removing wax from the carpet can be used only if other methods (how to remove wax from the carpet in the home from a candle by cold and heat, described at the beginning of the article) did not lead to the desired result, or the pollution was extensive. In such cases, only solvents will be effective, such as white spirit, kerosene, acetone or purified gasoline. When using them, precautions must be adhered to:

  • The treatment of the carpet must be carried out in a well-ventilated room;
  • When cleaning, do not forget personal protective equipment (gloves, respirator, close-fitting clothing);
  • Before you remove wax from the carpet, it is recommended to try the product on an inconspicuous area of the product, since these solvents are aggressive. They can lead not only to discoloration, but also to more serious damage.

If no adverse effects have been detected, you can remove the wax with the solvent by following the instructions:

  • Moisten a cotton pad with the product.
  • Treat the contaminated area with the disk.
  • After achieving the desired result, the carpet should be cleaned as usual using detergents.
  • The carpet should be dried and ventilated.
remove wax

Preventive measures

To prevent the carpet from being spoiled by candle wax, it is recommended to adhere to precautions:

  • Use quality candles that contain only wax (paraffin), stearic acid (allows you to minimize waste when the candle burns), perfumes and dyes;
  • place candles in candlestick holders with a large bowl, and regularly remove any wax residue from them;
  • Do not place candles near a fan or open window.

It is better to remove wax from the carpet as soon as it appears, since this stain is able to penetrate deep into the fibers of the product and collect dirt. And then you won’t need to figure out how to clean the carpet from wax. In addition, the removal of stale stains can cause difficulty and damage the carpet, the restoration of which can be costly.